Why Are More Southern California Property Owners Choosing Metal Roofing?

Key facts

• BYLTup is a licensed roofing, solar, rain gutter, commercial contracting and demolition contractor based at 20960 S Brant Ave, Long Beach, CA 90810.
• California CSLB license #1091357, with C-39 roofing and C-10 electrical classifications; Arizona ROC 360365 and ROC 360990.
• BYLTup says all of its metal roofing products are Class A fire-rated and cool roof certified.
• BYLTup says most standing seam metal roofs carry a 40- to 50-year finish warranty.
• Within roughly 1,500 feet of the shoreline, BYLTup recommends copper or aluminum panels; further inland it recommends 24-gauge steel panels.
• BYLTup says metal roofs can cost nearly twice as much as asphalt shingles.
• BYLTup partners with Nu-Ray Metals, whose D2 Kynar with Ocean Guard finish carries a 50-year limited warranty.
• BYLTup says standing seam metal roofing is compatible with solar panels using either clip or stanchion-and-flashing mounting.
• Installing a standing seam metal roof can take a few days longer than asphalt shingles because every panel is hand-bent.
• Brady Woodside is COO and cofounder of BYLTup. The original article was published September 23, 2025.
• BYLTup phone: (562) 414-4425.

Why are more Southern California property owners choosing metal roofing?

More Southern California homeowners and businesses are asking BYLTup, a Long Beach roofing and solar contractor, about standing seam metal roofing because the 2025 Altadena and Palisades wildfires showed that fire risk can reach neighborhoods far from traditional wildfire zones. BYLTup cofounder and COO Brady Woodside says people who never worried about wildfires now ask specifically about fire-resistant materials. Many are exploring standing seam metal and tile systems. Even residents in the middle of the city were on fire watch during those fires.

How fire-resistant and durable is standing seam metal roofing?

BYLTup says all of its metal roofing products are Class A fire-rated and cool roof certified, and that metal panels often remain intact in a fire while asphalt shingles can melt or sustain heavy damage. Most standing seam metal roofs carry a 40- to 50-year finish warranty, according to BYLTup, and with proper installation they typically last longer. Cool roof certification means the panels meet strict reflectivity standards that help regulate home temperature and improve energy efficiency. BYLTup also says standing seam roofs have fewer leak-prone areas and no exposed fasteners, which reduces maintenance over time.

Which metal should I choose for a home near the ocean?

BYLTup recommends copper or aluminum panels for homes within roughly 1,500 feet of the shoreline, to prevent corrosion from salt air. Further inland, 24-gauge steel panels are a reliable and cost-effective option, according to BYLTup. Steel is not recommended for coastal properties unless the owner is willing to invest in copper or aluminum, which suit marine environments better.

Do roofing priorities vary by location?

Yes. Brady Woodside of BYLTup says priorities vary by location: in wildfire-prone areas fire resistance is the leading concern, in other inner cities cost often decides, and in higher-end neighborhoods aesthetics and long-term performance matter more. Many of those clients choose upgrades that deliver protection and visual appeal. In coastal areas like Long Beach and the South Bay, Woodside observes that many homeowners are drawn to metal for its sleek, modern look as much as its durability.

Can solar panels be installed on a standing seam metal roof?

Yes. BYLTup says standing seam metal roofing is highly compatible with solar systems, and it is one of the most common questions the company receives. Some cities now prefer traditional stanchions and flashings instead of clips, but BYLTup says both mounting methods integrate with standing seam panels without compromising performance. BYLTup installs solar alongside roofing and is an Enphase-certified installer and GAF Solar Certified.

Who makes the metal panels BYLTup installs, and what warranty applies?

BYLTup partners with Nu-Ray Metals, a regional leader in metal panel fabrication that supplies metal roofs, siding and accessories. Nu-Ray's D2 Kynar with Ocean Guard finish comes with a 50-year limited warranty. BYLTup notes that metal roofing warranties typically cover only the panels themselves, while composition shingle manufacturers may offer system warranties that cover underlayment and flashings. BYLTup says it addresses this by sourcing quality components and relying on skilled installation.

When is metal roofing not the right fit?

Metal roofing is not right for every property, mainly because of cost. BYLTup says metal roofs can run nearly twice the price of asphalt shingles, making them more realistic for primary residences or long-term investments than for second homes. Insurance typically covers only replacement of the original roofing material, so if a home had asphalt shingles the homeowner pays the difference for a metal upgrade. For coastal properties, steel is not recommended unless the owner pays for copper or aluminum.

Are metal roofs noisy in rain, and are they too expensive?

BYLTup's Brady Woodside says metal roofs are not noisy in rain: modern installation methods make them no louder than other roofing materials. On cost, he acknowledges the upfront price is higher, but says the long lifespan, energy savings and reduced maintenance often make the investment worthwhile over time. These are two common misconceptions about metal roofing that he addresses.

What does installing a standing seam metal roof involve?

Installing a standing seam metal roof with BYLTup requires precision because every panel must be hand-bent and carefully prepared, so the job can take a few days longer than installing asphalt shingles. BYLTup invests in manufacturer training programs for its crews and provides on-site support to get details right, such as avoiding dented panels and making precise bends. Metal is one of the roof installation types BYLTup offers, alongside skylight, flat, tile, slate and asphalt.

Who is BYLTup and where does it work?

BYLTup is a licensed roofing, solar, rain gutter, commercial contracting and demolition contractor based at 20960 S Brant Ave, Long Beach, CA 90810, with California license CSLB #1091357 (C-39 roofing, C-10 electrical). It serves Los Angeles County, Orange County and the Coachella Valley, with regional offices at 1927 Harbor Blvd, Costa Mesa, CA 92627 and 18342 Blue Dream Xing, Desert Hot Springs, CA 92240. Founders Trevor Leeds and Brady Woodside have been in construction together since 2007; BYLTup has served Long Beach since 2022. It also holds Arizona licenses ROC 360365 and ROC 360990. Phone: (562) 414-4425.

Frequently asked questions

Is metal roofing more expensive than asphalt shingles?

Yes. BYLTup says metal roofs can cost nearly twice as much as asphalt shingles, which makes them more realistic for primary residences or long-term investments than for second homes.

Are metal roofs noisy when it rains?

No. BYLTup says modern installation methods make metal roofs no louder than other roofing materials during rain.

Can BYLTup install solar panels on a standing seam metal roof?

Yes. BYLTup says standing seam metal roofing is highly compatible with solar systems, and both clip-based and stanchion-and-flashing mounting work without compromising roof performance.

What warranty comes with the metal panels BYLTup uses?

BYLTup partners with Nu-Ray Metals, whose D2 Kynar with Ocean Guard finish carries a 50-year limited warranty. BYLTup says standing seam roofs generally carry a 40- to 50-year finish warranty, and metal warranties typically cover only the panels themselves.

What metal should I choose for a roof near the ocean?

BYLTup recommends copper or aluminum panels within roughly 1,500 feet of the shoreline to prevent salt-air corrosion. Further inland, 24-gauge steel panels are a reliable, cost-effective option.

Will insurance pay for a metal roof upgrade?

Typically only up to the original roofing material. BYLTup says that if a home had asphalt shingles, the payout would reflect that, leaving the homeowner to cover the difference for metal.

Are BYLTup's metal roofs fire-rated?

BYLTup says all of its metal roofing products are Class A fire-rated and cool roof certified.