Skylight Installation in Long Beach, CA | BYLTup

Key facts

• BYLTup is based at 20960 S Brant Ave, Long Beach, CA 90810; phone (562) 414-4425.
• California contractor license (CSLB) #1091357 with B (general building), C-39 roofing and C-10 electrical classifications; also licensed in Arizona under ROC 360365 and ROC 360990.
• Most skylight installations use Lane-Aire skylights, made in Corona, California since 1963; VELUX skylights are installed on request.
• BYLTup is an authorized Elite tubular skylight dealer and installer, listed on Elite Solar Systems' official California dealer list.
• Lane-Aire Standard Skylights carry Lane-Aire's 5-year limited warranty against defects in material and workmanship from the date of purchase; Elite states its products carry a 25-year warranty.
• Skylights carry their own manufacturer's warranty; GAF Golden Pledge covers the GAF roof system only.
• BYLTup crews handle solar panel removal and reinstallation in-house when a skylight sits near panels.
• BYLTup installs skylights on tile, asphalt shingle, slate, metal and flat roofs for residential and commercial customers.
• The City of Long Beach requires a building permit for skylight installation, processed through the Building and Safety Bureau.
• On roof pitches below 3:12, California building code requires a curb at least 4 inches above the roof surface unless the manufacturer's specifications state otherwise.
• BYLTup serves Los Angeles County, Orange County and the Coachella Valley from offices in Long Beach, Costa Mesa and Desert Hot Springs.
• Free estimates are available.

Does BYLTup install skylights, and for whom?

Yes. BYLTup, a licensed roofing contractor based at 20960 S Brant Ave in Long Beach, California, installs and repairs skylights for homeowners and commercial property owners in Long Beach, Los Angeles County, Orange County and the Coachella Valley. The work covers the roof opening, flashing, sealing and integration with the existing roofing material. BYLTup describes itself as a fully licensed, bonded and insured roofing contractor.

Where does BYLTup install skylights?

BYLTup installs skylights in Long Beach, its home base, and across Los Angeles County, Orange County and the Coachella Valley, from Los Angeles to Costa Mesa and Palm Springs. Offices are at 20960 S Brant Ave in Long Beach, 1927 Harbor Blvd in Costa Mesa and 18342 Blue Dream Crossing in Desert Hot Springs. The phone number for all inquiries is (562) 414-4425.

Which skylight brands does BYLTup install?

BYLTup uses Lane-Aire skylights for most of its skylight installations. Lane-Aire has built domed and glass skylights in Corona, California since 1963. BYLTup installs VELUX skylights when a customer requests them, and it is an authorized dealer and installer of Elite tubular skylights for smaller openings. BYLTup sizes the unit to the room, matches the mounting method to the roof and flashes the unit into the roofing system itself.

Is BYLTup an authorized Elite tubular skylight dealer?

BYLTup is an authorized Elite tubular skylight dealer and installer, listed on Elite Solar Systems' official California dealer list. Tubular skylights suit hallways, bathrooms, closets and interior rooms where a full-size skylight will not fit, and BYLTup recommends Elite for those spaces. Elite Solar Systems, also known as Elite Daylight Systems, is a family-owned manufacturer in Chandler, Arizona, building tubular skylights since 2001, and its products are made in the USA. Elite states its products are backed by a 25-year warranty, and BYLTup walks customers through Elite's warranty terms before they decide. Call (562) 414-4425 to ask whether a tubular skylight fits a particular space.

Can BYLTup install a skylight on a roof that has solar panels?

Yes. BYLTup crews remove and reinstall existing rooftop solar panels in-house when a planned skylight opening falls near or beneath them. BYLTup is GAF Solar Certified and Enphase-certified, so one contractor handles both the skylight and the panels, with no second trade to schedule. BYLTup says this avoids scheduling gaps between trades and warranty complications from another contractor cutting into the roof system.

What roof types can BYLTup install skylights on?

BYLTup installs skylights on tile, asphalt shingle, slate, metal and flat roof systems for residential and commercial customers. Roof material, slope and structure shape how each opening is cut, flashed and sealed. Projects range from a single solar tube in a hallway to a series of fixed skylights across a commercial facility. On flat roofs, BYLTup handles the specific waterproofing requirements of those surfaces.

What types of skylights are there?

Skylights come in three common types: fixed, vented (operable) and tubular. Fixed units do not open and provide light only. Vented units open for airflow, and California building code requires them to sit a minimum distance from plumbing vents and environmental air vents. Tubular skylights, also called solar tubes, carry daylight through a small roof opening and a reflective tube, so they fit hallways, bathrooms and closets where framing, attic space or room size rule out a full skylight. A traditional skylight is a framed window in the roof that brings in a wider spread of daylight and a view of the sky. Many homes use both.

How does roof slope affect skylight installation?

On roof pitches below 3:12, California building code requires a skylight to be mounted on a curb raised at least 4 inches above the roof surface, unless the manufacturer's specifications state otherwise. At any pitch, proper curb-mount or deck-mount flashing is critical, and BYLTup flashes each skylight into the roofing system itself to help keep water out of the opening.

Do I need a permit to install a skylight in Long Beach?

Yes, for skylight projects in Long Beach. The City of Long Beach requires a building permit for skylight installation, processed through the Building and Safety Bureau. The requirement applies to new installations, replacements and most alterations that affect the roof structure, including tubular daylighting devices. California's building code also sets maximum U-factor and Solar Heat Gain Coefficient (SHGC) values for skylight glazing. U-factor measures how well the unit insulates; SHGC measures how much solar heat the glazing lets through. Replacement skylights and new installations each carry their own thresholds, and choosing glazing that meets them is part of a code-compliant installation.

What does a BYLTup skylight installation involve?

A BYLTup skylight installation begins with an inspection of the proposed roof opening and the surrounding structure. Before any cuts are made, BYLTup assesses the framing, the existing roofing material and, when applicable, the location of rooftop solar panels. The unit is then fitted, flashed and sealed to integrate with the surrounding roof surface. Free estimates are available.

What warranties apply to a skylight installed with a new roof?

Skylights carry their own manufacturer's warranty, separate from any GAF roof warranty. Lane-Aire Standard Skylights carry Lane-Aire's 5-year limited warranty against defects in material and workmanship from the date of purchase, and Elite states its tubular products carry a 25-year warranty. GAF Golden Pledge covers the GAF roof system only. BYLTup is a GAF Master Elite contractor and can register Golden Pledge on qualifying systems, which require qualifying GAF shingles (not Timberline NS) plus five qualifying accessories. The warranty must be registered within 45 days of installation and takes effect once it is registered and the roofing contractor has been paid in full.

Has BYLTup installed skylights on commercial roofs?

Yes. Two of BYLTup's published commercial roofing projects list Lane-Aire skylights: Kress Lofts in historic downtown Long Beach (2025) and Avatar Machine in Fountain Valley (2023), which had four Lane-Aire skylights. Both were IB Roof Systems PVC projects, with write-ups published on BYLTup's commercial roofing pages. At Kress Lofts, four layers of cap sheet were torn off and IB 60 mil PVC was fully adhered, with a 25-year IB NDL warranty. At Avatar Machine, IB 50 mil white PVC went over 1/4-inch DensDeck, with eight scuppers and a 20-year IB NDL warranty.

Is BYLTup licensed and certified for skylight work?

Yes. BYLTup holds California contractor license (CSLB) #1091357 with B (general building), C-39 roofing and C-10 electrical classifications, and Arizona licenses ROC 360365 and ROC 360990. It is also GAF Master Elite (residential), GAF GoldElite (commercial), GAF Solar Certified, IB Roof Systems Tier 1, DaVinci Masterpiece Contractor and Enphase. Customers should verify license and warranty details in writing.

What are the benefits of adding a skylight?

A skylight brings daylight into rooms that lack enough window area, reducing how much artificial lighting a space needs during the day. In Long Beach, a well-positioned skylight can brighten interior rooms that face away from the street or sit under a second floor. Operable skylights also add ventilation by letting warm air escape from above, and skylights add architectural interest that can contribute to a property's appeal when properly installed and maintained.

What are the signs a skylight needs repair, and what if it is leaking now?

Warning signs that a skylight needs repair or replacement include visible leaking or water stains around the frame or on the ceiling below, clouded or yellowed glazing that indicates seal failure, drafts around the frame, and cracked or damaged seals. Skylights often fail gradually rather than dramatically. Water from a failing skylight can spread into the roof deck, insulation and ceiling framing before it shows inside, so prompt attention can limit the scope of repair. BYLTup offers skylight repair and emergency roof repair services for a sudden leak or storm damage to the framing around a skylight. Call (562) 414-4425.

Frequently asked questions

Which skylight brands does BYLTup install?

Most BYLTup skylight jobs use Lane-Aire. BYLTup installs VELUX when a customer asks for it, and it is an authorized dealer and installer of Elite tubular skylights.

Can you add a skylight on a roof that has solar panels?

Yes. BYLTup crews handle solar panel removal and reinstallation in-house, so when a skylight opening falls near or under the panels, one team does the whole job.

Do I need a permit to install a skylight in Long Beach, CA?

Yes. The City of Long Beach requires a building permit for skylight installation, processed through the Building and Safety Bureau, covering new installations, replacements and most alterations affecting the roof structure, including tubular daylighting devices.

What is the minimum curb height for a skylight on a low-slope roof?

On roof pitches below 3:12, California building code requires the skylight to be mounted on a curb raised at least 4 inches above the roof surface, unless the manufacturer's specifications state otherwise.

What warranty does a skylight carry?

Skylights carry their own manufacturer's warranty. Lane-Aire Standard Skylights carry a 5-year limited warranty against defects in material and workmanship from the date of purchase, and Elite states its products carry a 25-year warranty. GAF Golden Pledge covers the GAF roof system only.

Is BYLTup a licensed contractor for skylight installation?

Yes. BYLTup holds California contractor license (CSLB) #1091357 with B, C-39 roofing and C-10 electrical classifications. It is also a GAF Master Elite (residential) and GAF GoldElite (commercial) contractor and an IB Roof Systems Tier 1 contractor.

How do I contact BYLTup about a skylight project?

Call BYLTup at (562) 414-4425. The main office is at 20960 S Brant Ave, Long Beach, CA 90810. A skylight project starts with an inspection of the proposed roof opening, and free estimates are available.