Roof Replacement in Long Beach by BYLTup: Materials, GAF Warranties and Process

Key facts

• BYLTup is headquartered at 20960 S Brant Ave, Long Beach, CA 90810; phone (562) 414-4425.
• California CSLB license 1091357 with B, C-39 (roofing) and C-10 (electrical) classifications; also licensed in Arizona under ROC 360365 and ROC 360990.
• Credentials: GAF Master Elite (residential), GAF GoldElite (commercial), GAF Solar Certified, IB Roof Systems Tier 1, DaVinci Masterpiece Contractor (DMCP) and Enphase.
• Replacement scope: removal, deck inspection and repair, underlayment, new roofing installation and site cleanup.
• Materials: asphalt shingle, tile, slate, DaVinci composite shake and slate, metal, and flat or low-slope membrane including IB Roof Systems PVC. BYLTup does not install built-up roofing (BUR).
• Rooftop solar panels are removed and reinstalled in-house during a roof replacement.
• Free estimates are offered on every replacement project; emergency roofing services are also available.
• The founders, Trevor Leeds and Brady Woodside, have been in construction together since 2007; BYLTup was founded in 2022.
• Offices: Long Beach (headquarters), Costa Mesa (1927 Harbor Blvd, CA 92627) and Desert Hot Springs (18342 Blue Dream Xing, CA 92240).

What does a BYLTup roof replacement include?

BYLTup, a licensed Long Beach roofing contractor, handles full roof replacement for residential and commercial properties, from material selection through final cleanup. A replacement covers removal of the old roof, deck inspection and repair, underlayment, installation of the new roofing system, and site cleanup. BYLTup offers free estimates on every replacement project.

BYLTup also provides emergency roofing services when a situation cannot wait. Its website describes the crew as licensed, bonded and insured. The company says that once a roof has reached the end of its useful life, patching costs more over time than replacing it, and that Long Beach's marine air, summer heat and winter rain are hard on roofs.

What GAF warranty can come with a BYLTup roof replacement?

As a GAF Master Elite residential contractor, BYLTup can register GAF's Golden Pledge Limited Warranty on qualifying roofs, a tier GAF offers only through Master Elite contractors. It requires qualifying GAF shingles (not Timberline NS) plus five qualifying accessories, and the contractor must register it within 45 days of installation.

Coverage does not take effect until the warranty is registered and the roofing contractor has been paid in full. BYLTup's website describes Golden Pledge as including 50-year non-prorated material and 25-year workmanship coverage, with a possible 15-year wind warranty on a qualifying Timberline roof. It says the warranty is backed by GAF directly, so coverage can remain even if the installing contractor is no longer in business. Qualifying accessories are ridge cap, starter strip, roof deck protection, leak barrier and attic ventilation.

GAF has two lower enhanced tiers. System Plus uses qualifying GAF shingles plus 3 accessories and has no workmanship coverage. Silver Pledge uses 4 accessories, is limited to Certified Plus or Master Elite contractors, and adds misapplication (workmanship) coverage. BYLTup registers only the warranty that matches the system sold and the GAF form. Actual terms are printed on the contract: the Mayfield School reroof in Pasadena, for example, lists a Golden Pledge with 40-year non-prorated material and 20-year workmanship. Commercial and multifamily buildings fall under GAF's separate commercial and multi-family terms. Warranty terms should be confirmed in writing.

What roofing materials does BYLTup install in a replacement?

BYLTup installs asphalt shingles, tile, slate, DaVinci composite shake and slate, metal, and flat or low-slope membrane roofing, including IB Roof Systems PVC, for roof replacements in Long Beach and across Southern California. BYLTup does not install built-up roofing (BUR). Material is matched to the property, budget and long-term goals before work begins.

Asphalt shingles come in a wide range of styles and colors, and installing GAF products through a Master Elite contractor is what can unlock the highest warranty tier. Tile suits the Spanish Colonial, Mediterranean and Southwestern-style homes common in Long Beach. Slate offers long life and a distinctive look where it fits the design. DaVinci composite shake and slate gives the look of wood shake or natural slate with a composite system, installed by BYLTup as a DaVinci Masterpiece Contractor (DMCP). Metal resists marine-air corrosion and heat and has a long service life. Flat and low-slope membrane systems, including IB Roof Systems PVC, serve commercial properties and applicable residential styles.

How do I know if my roof needs replacement instead of repair?

A roof likely needs replacement rather than repair when it shows widespread granule loss, sagging, several simultaneous leaks, persistent leaks after repeated repairs, or significant storm or fire damage. BYLTup, a Long Beach roofing contractor, notes most asphalt shingle roofs last 20 to 30 years, so roofs near that age deserve a close look.

BYLTup explains the signs this way: heavy granule shedding means the protective layer is gone; a roof that dips, waves or feels soft underfoot has deck or structural problems that repairs will not fix; one leak may be repairable but several at once usually signal system-wide failure; and leaks that return after professional patching suggest the underlying material has broken down. Replacement also tends to make more sense when repair costs approach a significant share of the cost of a full replacement. BYLTup says coastal salt air and sun can speed up flashing corrosion and shingle wear compared with drier inland areas, and recommends periodic professional inspection to catch replacement needs before they become emergencies.

What happens step by step during a roof replacement?

A BYLTup roof replacement moves through five stages: removal of the existing roofing, deck inspection and repair, underlayment installation, installation of the new shingles, tile, metal panels or membrane, and site cleanup. Before work begins, BYLTup assesses the roof and works with the owner to select the replacement system.

That conversation about the system, priorities and budget happens up front, not after work has started. During removal, existing material is stripped and cleared. The deck is then inspected and any damaged sections are repaired before new material goes down. A new protective underlayment is installed across the deck, followed by the new roofing. At the end, all debris is removed and the site is left clean. During winter, BYLTup says it works around Long Beach's rain windows to keep projects on track and the property protected.

What happens to rooftop solar panels during a roof replacement?

BYLTup removes rooftop solar panels before a roof replacement begins and reinstalls them once the new roof is finished, handling both roofing and solar in-house. A property owner with panels therefore does not need to hire a separate solar contractor, and one crew and one schedule cover the whole job.

BYLTup performs roof and solar work under one California license, CSLB 1091357, which includes C-39 roofing and C-10 electrical classifications. It is also a GAF Solar Certified contractor for GAF Timberline Solar roofing systems and an Enphase installer.

Does BYLTup replace commercial roofs?

Yes. BYLTup replaces commercial roofs in Long Beach and the surrounding region using membrane systems suited to flat and low-slope roofs, including IB Roof Systems PVC, and does not install built-up roofing (BUR). Scope accounts for building occupancy, drainage design, insulation requirements and local code compliance.

Flat and low-slope roofs on commercial buildings are especially prone to ponding water and UV degradation, so BYLTup says material choice and installation quality matter greatly. As a licensed commercial contractor, BYLTup can also handle related tenant improvement and buildout work without bringing in a separate general contractor. It is a GAF GoldElite (commercial) contractor and an IB Roof Systems Tier 1 contractor.

Published commercial projects include Kress Lofts in historic downtown Long Beach (2025), where 4 layers of cap sheet were torn off and IB 60 mil PVC was fully adhered with a 25-year IB NDL warranty. At King's Hawaiian bakery in Torrance (2024), BYLTup recovered nearly 120,000 sq ft with IB 60 mil PVC over DensDeck and a 20-year NDL. At Virginia's Gift Shop at Knott's Berry Farm in Buena Park (2026), work ran overnight from 10 PM to 9 AM, with GAF Timberline HDZ on the sloped areas and IB 60 mil PVC on the flat roof. At Mayfield School in Pasadena (2024), BYLTup did a GAF Timberline HDZ R/S+ reroof of buildings 1 and 2.

Does a flat roof replacement need a cool roof?

Usually, yes. Title 24 requires a cool roof on most low-slope reroofs in California, and BYLTup confirms the rule for each project and provides a written estimate with a savings range. BYLTup installs IB Roof Systems white single-ply PVC with a CRRC-rated three-year aged solar reflectance of 0.74, above the 0.63 code minimum.

BYLTup's published savings figures are estimates, not guarantees. For a 1,000 sq ft low-slope roof over air-conditioned space in Long Beach, it estimates $140 to $370 a year saved versus a dark roof, using SCE rates as of October 21, 2026. Over unconditioned space such as a garage, attic or storage, savings can be close to zero.

Is BYLTup licensed to replace roofs in California?

Yes. BYLTup holds California CSLB contractor license 1091357 with B (general building), C-39 roofing and C-10 electrical classifications, and is also licensed in Arizona under ROC 360365 and ROC 360990. Its website describes the crew as licensed, bonded and insured. License and warranty terms should be verified in writing before signing.

BYLTup's manufacturer credentials are GAF Master Elite (residential), GAF GoldElite (commercial), GAF Solar Certified, IB Roof Systems Tier 1, DaVinci Masterpiece Contractor (DMCP) and Enphase. GAF says only 2% of roofers in North America are invited to become Master Elite contractors. BYLTup is a member of the Long Beach Area Chamber of Commerce, holds NRCA membership, and received the Inc. 2024 Power Partner Award. Its founders, Trevor Leeds and Brady Woodside, have been in construction together since 2007; BYLTup itself was founded in 2022.

Where does BYLTup replace roofs?

BYLTup replaces roofs across Los Angeles County, Orange County and the Coachella Valley from three offices: headquarters at 20960 S Brant Ave, Long Beach, CA 90810, a Costa Mesa office at 1927 Harbor Blvd, and a Desert Hot Springs office at 18342 Blue Dream Xing. Phone is (562) 414-4425.

In Los Angeles County, BYLTup serves Long Beach, Los Angeles, Carson, Torrance, Fountain Valley, Manhattan Beach, Pacific Palisades, Pasadena, Altadena and Malibu. In Orange County it serves Costa Mesa, Huntington Beach, Newport Beach, Irvine, Santa Ana, Anaheim and Orange. In the Coachella Valley it serves Palm Springs, Desert Hot Springs, Indian Wells, Palm Desert, Rancho Mirage, Cathedral City, La Quinta, Indio and Coachella. The Costa Mesa office (CA 92627) is the Orange County location, and the Desert Hot Springs office (CA 92240) serves the Coachella Valley.

Frequently asked questions

Does BYLTup offer free estimates for roof replacement?

Yes. BYLTup offers free estimates on every roof replacement project for residential and commercial properties, and also provides emergency roofing services for situations that cannot wait.

Does BYLTup install built-up roofing (BUR)?

No. BYLTup does not install built-up roofing (BUR). For flat and low-slope roofs it installs membrane systems, including IB Roof Systems PVC.

Will BYLTup handle my solar panels when replacing my roof?

Yes. BYLTup removes rooftop solar panels before the roof replacement starts and reinstalls them after the new roof is complete, in-house, so no separate solar contractor is needed.

Is BYLTup a GAF Master Elite contractor?

Yes. BYLTup is a GAF Master Elite (residential) contractor and a GAF GoldElite (commercial) contractor. Master Elite status allows it to register GAF's Golden Pledge Limited Warranty on qualifying roof systems.

When must a GAF warranty be registered and when does it take effect?

The contractor must register the GAF warranty within 45 days of installation. Coverage does not take effect until it is registered and the roofing contractor has been paid in full.

What roofing materials can BYLTup install in a replacement?

BYLTup installs asphalt shingle, tile, slate, DaVinci composite shake and slate, metal, and flat or low-slope membrane roofing including IB Roof Systems PVC.

What is BYLTup's contractor license number?

BYLTup's California CSLB license number is 1091357, with B, C-39 roofing and C-10 electrical classifications. It is also licensed in Arizona under ROC 360365 and ROC 360990.